To perform a blind transfer:  

1. Press the TRANSFER key or Transfer (Trans) during a call. 

 2. You can do one of the following: - Enter the number or select a contact from the placed call list you want to transfer to. - Press Directory (Dir). Select a desired contact from the Directory list(s). On the SIP-T48S/T48G IP phone, tap the Directory or History. Tap the desired contact 

. 3. Press B Transfer (B Trans) to complete the transfer. You can also hang up the handset or press the TRANSFER key when transferring a call by entering number. From the Calls screen or Transfer to screen, you can also use a Transfer key (refer to Configuring a Transfer Key) or BLF List key (refer to Configuring BLF List Keys Automatically) to perform blind transfer to the pre-defined number directly. Before performing a blind transfer using these keys, make sure that the Transfer Mode via Dsskey is configured as Blind Transfer. For more information on how to configure it, refer to Configuring Transfer Mode via Dsskey.  

To perform a semi-attended transfer:  

1. Press the TRANSFER key or Transfer (Trans) during a call. 

2. You can do one of the following: - Enter the number you or select a contact from the placed call list want to transfer the call to. - Press Directory (Dir). Select a desired contact from the list(s). On the SIP-T48S/T48G IP phone, tap the Directory or History. Tap the desired contact.  

3. Press the OK key, # key or Send to dial out. 

 4. Press the TRANSFER key or Transfer (Trans) to perform a semi-attended transfer when you hear the ring-back tone, or perform an attended transfer after the party answers the call. If you are using a handset, the transfer can be completed by hanging up the handset.